TFP-1212

GENERAL SPECIFICATIONS
You may contact Teknim for detailed information on product activation and system security.
Maximum Loop
Backup Battery
Breaking Voltage
230 / 110 VAC
(+%10 / -%15)
3A
Number of Monitored
Siren Outputs
Cable Type
1 x NC/NO
dry contact, 30V, 2A
- EN 54-2 AND EN 54-4 Certification
- Ensures system security for installer companies and end-users via activation procedures required
for initial installation.
- Technical personnel friendly easy installation and programming specifications
- 2 Loops capacity
- Cable distance up to 2,5 Km per loop
- 240 device addressing capacity on each loop, total of 480 device addressing capacity
- 72 zones that can be individually programmed
- Capacity up to total of 7.680 addressed devices and 1.152 zones by network structure (Using
optional TFC-1208 Network module)
- Easy to read, 240*64 wide LCD graphic display and user-friendly interface
- Display screen customizable with company logo, contact information, images, etc. (Via TFY-1000
Software)
- Network structure that can be extended up to 16 panels and operate as a single system
via RS-485 based TdNET communication protocol developed specifically by Teknim engineers (using
optional TFC-1208 Network Module)
- Each panel on network can be interconnected using 1 Km long cable
- Same level of accessibility and command sending to all panels via peer-to-peer communication
network feature
- Uninterrupted and reliable data communication between loop card and end-units over power line
thanks to FlashLink® communication protocol developed by Teknim
- Advanced panel programming and user-friendly system configuration via TFY-1000 software installed
on a computer to be connected to panel over TCP/IP Ethernet (LAN/WAN).
- Graphic monitoring of 1 panel or a network of up to 16 panels as a single system on a map as well
as managing some of the features such as evacuation, reset, siren/buzzer silencing via TFY-2000
Monitoring Software developed specifically by Teknim software engineers.

- Remote panel monitoring and management via TFP-1240/TFP-1245 REPEATER PANEL WITH ANALOG ADDRESS
connection (1 Km cable distance).
- Storing up to 12.000 events of alarms, errors and warnings with time-stamp on the memory.
- Exact identification of possible disconnection points on the line via bi-directional, smart loop control feature.
- In case a device on a loop is removed and reconnected on the line, missing device warning is
quickly and automatically reset without further action on the panel.
- 2 each independent and delay addressable /monitored siren output. Connection up to 60 sirens
without external supply if used with Teknim TFS-3192 siren.
- Detailed viewing of voltage/current information of panel and loop on the graphic LCD display of panel
- Night/day operation mode that can be programmed automatically or by user in order for alarm verification
- Siren delay time individually programmable for each zone
- Automatic Alarm of devices connected to the system, informing and prompting user via LCD screen,
enabling easy inclusion of devices into the system
- New devices can be easily included in the loop via star connection in mandatory cases required for the project
- Multiple language support
- 3 Years warranty against production and fabrication defects

Other Informations

TFP-1212 Series panel is a consumer and technician friendly fire Alarm panel with analog address designed
for Harsh Environments. Each Teknim Panel can flawlessly communicate between detector and end-units at
long distanced using FLASHLINK loop communication protocol developed by Teknim engineers.It also enables
networking up to 16 panels via TdNET protocol and TFC-1208 network module developed genuinely. Thus, it
can be operated as a single panel constituted of 16 panels and 7.680 end units.
LCD graphic display on TFP-1212 Panels enables easy and quick viewing, understanding, interruption of errors and
warnings and overall system use. Entire configuration and system design can be easily performed from the panel
or using any computer via TFY-1000 configuration software supplied with the panel. Furthermore, all panel
settings can be changed over internet using TCP/IP connection included in standard panel structure. Unauthorized
access can be prevented via activation code application developed specifically for Teknim panels, ensuring system
safety for both end-users and installer companies.
TFP-12XX series panels are designed in accordance with European Community standards.

New Product